To help you with the construction or maintenance of your project, we offer you this complete range of accessories and spare parts below. Here you will find, for example, our variable power supplies, magnet detectors and other interesting products.
small accessories
Scenery
Small accessoiries
Discover the accessories specially designed to enhance your Magnorail experience
SO-1: Magnet viewer
RRP: €7,00
- Magnet viewer to locate the magnets in the Magnorail chain through the road surface.
- Very useful, Magnet viewer is an essential piece of equipment especially if using the non-standard bicycles like the tandem, cargo bike and ice-cream vendor. The Magnorail Viewer enables you to see the sequence of magnets under your roadbed allowing for correct placement of your bicycles but also locating track magnets for your vehicles.
SO-2: Transparent wheel
PVC : €5,50
SO-3: Set of magnets (12 pieces)
RRP: €5,00
- 4x cube
- 4x cylinder
- 4x disc
SO-4: Pair of ‘O’ rings (2 pièces)
PVC : €6,50
‘O’ rings for blue chain
SO-15: Pair of ‘O’ rings (2 pièces)
PVC : €6,50
NEW !
‘O’ rings for green chain Generation 3
Power Supplies
All our accessories for powering your networks
SO-6: Variable power supply 220V/1-12V DC 2A and screw connector
RRP: €25,50
• This power supply has an Output with a voltage variator from 1 to 12V in direct current for a max current of 2A. A green LED indicates the voltage level. This is the essential accessory to power your magnorail system if you do not already have a transformer.
• Practical with its screw connector included, it will be perfect to power one or more motors of the Magnorail system or any other animation equipped with a 12 V DC motor, as well as LED model lights.
SO-7: Variable power supply 220V / 1-12V CC 2A with US plug
RRP: €25,50
• This power supply has an Output with a voltage variator from 1 to 12V in direct current for a max current of 2A. A green LED indicates the voltage level.
• Be careful, this power supply can be used only for American market and is designed to power one or more Magnorail system motors or any other animation equipped with a 12 V DC motor.
Scenery
Accessories developed by Maketis to make your Magnorail experience even more enjoyable
SO-9: Track cover supports for motor module
RRP: €5,40
• Track cover supports made of 8 mm thick MDF wood, adapted to the height of the track, to facilitate the laying of a covering.
• Contains 2 parts specially designed to surround the motor module.
• Perfectly suited to motor modules supplied individually (Uma-2, Umb-2, Umc-2) as part of an extension. It also complements the SO-11, SO-12 and SO-13 references for a complete expert set (BF-2, BS-2, BV-2).
• To learn more, check out our dedicated article in the NEWS tab.
SO-10: Track cover supports for Basic Set
RRP: €13,30
• Track cover supports made of 8 mm thick MDF wood, adapted to the height of the track, to facilitate the laying of a covering.
• Contains 2 pieces to surround the motor module and 34 small pieces to follow the curves of the flexible track (14 pieces with a low opening and 20 pieces with a high opening).
• This reference is specially designed to cover the entire track length of a basic set (95 cm).
• To learn more about our track cover accessories, check out our dedicated article in the NEWS tab.
SO-11: Track cover supports 60 cm Straight Line
RRP: €7,60
• Track cover supports made of 8 mm thick MDF wood, adapted to the height of the track, to facilitate the laying of a covering.
• Contains 6 long elements for straight sections and 6 short elements. Ideal for creating clean, perfectly aligned straight lines.
• This reference is specially designed to cover 60 cm of track, the equivalent of a UE-1 extension. It also covers 1/3 of the Expert Sets (BF-2, BS-2 and BV-2), which each include 3 x 60 cm of track.
• To learn more about our track cover accessories, check out our dedicated article in the NEWS tab.
SO-12: Track Cover Supports 60 cm Curve
RRP: €10,20
• Track cover supports made of 8 mm thick MDF wood, adapted to the height of the track, to facilitate the laying of a covering.
• Contains 24 small pieces to follow the curves of the flexible track (12 pieces with a low opening and 12 pieces with a high opening).
• This reference is specially designed to cover 60 cm of track, the equivalent of a UE-1 extension. It also covers 1/3 of the Expert Sets (BF-2, BS-2 and BV-2), which each include 3 x 60 cm of track.
• To learn more about our track cover accessories, check out our dedicated article in the NEWS tab.
SO-13: Track Cover supports 60 cm Mixed
RRP: €9,10
• Track cover supports made of 8 mm thick MDF wood, adapted to the height of the track, to facilitate the laying of a covering.
• Contains 4 long elements for straight sections, 6 short elements with low opening and 9 short elements with high opening, allowing you to create 20 cm in a straight line, 20 cm in a bend, and the remaining portion adjustable to your layout.
• This reference is specially designed to cover 60 cm of track, the equivalent of a UE-1 extension. It also covers 1/3 of the Expert Sets (BF-2, BS-2 and BV-2), which each include 3 x 60 cm of track.
• To learn more about our track cover accessories, check out our dedicated article in the NEWS tab.
SO-14: Track Cover Supports 60 cm Double Straight Line
RRP: €8,90
• Track cover supports made of 8 mm thick MDF wood, adapted to the height of the track, to facilitate the laying of a covering.
• Contains 6 long and short elements on the sides, and 3 long and short elements in the centre, specially designed to reproduce an HO-scale two-way road.
• Can be used to cover a 60 cm double track, i.e. two UE-1 extensions.
• To learn more about our track cover accessories, check out our dedicated article in the NEWS tab.
SO-100: Covering sheet A3 (420 x 300 mm) grey paving stones
PVC : €7,90
NEW !
• Made from printed, weathered cardboard and coated with a plastic film to ensure the magnets glide smoothly and to protect the material.
• Allows you to create approximately 160 cm of HO scale track.
• For more details, visit the dedicated page on our Maketis Website
SO-101: Covering sheet A3 (420 x 300 mm) light grey Asphalt
PVC : €7,90
NEW !
• Made from printed, weathered cardboard and coated with a plastic film to ensure the magnets glide smoothly and to protect the material.
• Allows you to create approximately 160 cm of HO scale track.
• For more details, visit the dedicated page on our Maketis Web site
SO-102: Covering sheet A3 (420 x 300 mm) beige paving stones
PVC : €7,90
NEW !
• Made from printed, weathered cardboard and coated with a plastic film to ensure the magnets glide smoothly and to protect the material.
• Allows you to create approximately 160 cm of HO scale track.
• For more details, visit the dedicated page on our Maketis Web site
